Peristaltic Pumps Application Examples
- Contaminated Groundwater
- Chemical Drum sampling
- Enzyme Isolation
- Fertilizer applications
- Flow Injection Analysis
- Pesticide delivery systems
- Greenhouse Watering
- Sewage sludge analysis
- Tree spraying Water salinity analyzers
- Wastewater sampling
Features |
Benefits |
| Noncontaminating | Samples collected only contact inside diameter (ID) of tubing. |
| Self-priming | Suction lifts up 8.8 m (29 ft) |
| Runs dry | Pump is not damaged when left unattended. |
| Wide range of tubing material | Compatible with water or waste samples |
| Easy clean-up | Simply change the tubing to clean the pump |
| Reversible | Purge and collect sample with one pump. |
| Modular design | Mix and match pump heads, tubing, and DC, AC, or hand-operated drives |
| OEM packages | Design into your water sampling or analytical equipment |
High-Purity Metering Pump
- Suitable for aggressive organic solvents
- Flow rates up to 65 ml/min with PTFE tubing
- Rigid tubing withstands pressure to 6.9 bar (100 psi)
- PTFE wetted parts allow contamination free pumping
- pumping Maintains high fluid purity
- Limited chemical exposure fluid contacts only the tubing
- Pump product shown
Composite Sampler
- Program operation to meet EPA sampling requirements
- Dual-line, 24-character, backlit LCD with glow in the dark keypad
- Locking latches prevent tampering: sampler floats for up to 30 minutes if dropped in water
- Complete ready to use system
- Passes through an 18″ diameter manhole
- Up to a 90-day standby for a remote signal
- Operates on an internal rechargeable battery, 12 VDC or 115/230 VAC
- Pump product shown SE-87516-121/5 Easy-Lead pump head
Hazardous Duty Pump
- Ideal for Transferring Hydrocarbons, Petroleum products, and distillates
- Suitable for Gasoline, Kerosene, heating oils, cutting fluids, and
- glycol based Coolants No electric power necessary, connect to Existing air supply or
- Compressor Ideal for Hazardous duty locations
- Intrinsically sale when Properly Grounded for static electricity
- Low-maintenance motor
- Pump products shown
Batch Caustic Pump
- For batch/bulk transfer and corrosive fluid dispensing
- Flow rates up to 42 LPM with B/T Perfect Positions pump tubing
- Ideal for viscous and shear-sensitive fluids
- Detachable controller for convenient component placement Rapid-Load pump head makes changing tubing quick and easy
- IP56-rated, washdown controller and drive are protected from water spray
- C-FLEX tubing offers excellent compatibility with common acids/bases
Rapid-Dry Adhesive Transfer
- Dosing various volumes of viscous (1200 cps), rapid-drying adhesive
- Eliminates problem of sticking valves, Regular pump maintenance, and periodic pump failure
- High Performance precision tubing has a thicker wall and higher suction for handling viscous fluids
- Compatibility of silicone tubing allows it to be used more than once; oversizing the tubing allows pumping at speeds below 200 rpm
- Drive control features deliver desired accuracy and flexibility
Chemical Sampling Pump
- Program fluid volume for repeat Sampling operations
- Controller is wall Mountable for Convenient location at a sampling station
- Controller display shows operating parameters and run status
- Easy-Load allows for quick tubing changes between batches of drums
- Pump head with PPS housing and stainless steel rollers
- Resists corrosion and chemical attack
- Pump is Self priming and reversible; easily prime or purge tubing
- Substitute tubing based on compatibility with various chemicals
- Pump products shown
Water Treatment Pump
- Brushless, Maintenance free motor for continuous duty
- Accurately meters chemical mixtures
- Digital display: Flow rate, Dispense volume, Copy number, and motor rpm
- Quick, complete feedback loop of operations via remote signals
- Modular design lets you place the controller where convenient
- iP66 rating permits hose down when needed
- Eany-Load II pump head for quick tubing changes and easy cleanup
Multichannel Feed Pump
- 100rpm drive lets you stack up to four heads for increased capacity
- Change tubing quickly without dismounting heads
- Drive offers repeat Dispensing Functionality with batch count
- Heads accept multiple tubing sizes for application flexibility
- Chem-Durance Bio pump tubing offers broad chemical compatibility and excellent pumping life
- Pump head with PPS housing and stainless steel rollers resists corrosion and chemical attack
Dye/ Pigment pump
- Brushless drive motor e maintenance free and continuous
- Epoxy powder coat paint resists corrosion and IP55 rating holds up to harsh environments
- Display of percent speed allows for repeatable rpm and flow settings
- Control dive speed remotely, pump running signal lets you monitor performance
- Powerful drive accepts two pump heads with any IP tubing formulation
- Pump is self-priming and reversible, easily prime or purge tubing
Carboy Pump
- Transfer chemicals at flow rates up to 8.0 LPM (2.1GPM)
- Reversible motor lets you Prime/Purge tubing easily
- Pump is self priming and non Siphoning
- Easy-Load pump head for quick changes between processes
- Tygon E-Lab tubing is Economical for Frequent Batch/Fluid changes
- Substitute tubing based on Compatibility with various chemicals
